| TBOTP Ø 25 x 102 mm, AH 3/8” x 24 thread | Ø 1” x 4” | Art. No: 132075-xx |
| TBOTP Ø 25 x 50 mm, AH 3/8” x 24 thread | Ø 1” x 2” | Art. No: 132073-xx |
| TBOTP Ø 19 x 102 mm, AH 3/8” x 24 thread | Ø 3/4” x 4” | Art. No: 132072-xx |
| TBOTP Ø 19 x 38 mm, AH 3/8” x 24 thread | Ø 3/4” x 1 1/2” | Art. No: 132070-xx |
| TBOTRN Ø 19 x 38 mm, AH 3/8” x 24 thread | Ø 3/4” x 1 1/2” | Art. No: 132080-xx |
| PCC Ø 50 x 50 mm, Shaft 8 mm | Ø 2” x 2” | Art. No: 132095-xx |
| PCC Ø 30 x 38 mm, Shaft 6 mm | Ø 1 1/8” x 1 1/2” | Art. No: 132096-xx |
| PRB Ø 20 x 55 mm, Shaft 6 mm | Ø 3/4” x 2 1/8” | Art. No: 132100-xx |
| RS Ø 60 x 3.5 mm, AH 3/8” x 24 thread bevelled | Ø 2 3/8” x 1/8” | Art. No: 132193-xx |
| RS Ø 50 x 3 mm, Shaft 6 mm | Ø 2” x 1/8” | Art. No: 132192-xx |
| RS Ø 30 x 6 mm, Shaft 6 mm | Ø 1 1/8” x 1/4” | Art. No: 132190-xx |
| RS Ø 30 x 4 mm, Shaft 6 mm | Ø 1 1/8” x 1/8” | Art. No: 132191-xx |
| RB Ø 26 mm, 3/8” x 24 thread | Ø 1” | Art. No: 132103-xx |
| RB Ø 20 mm, 3/8” x 24 thread | Ø 13/16” | Art. No: 132102-xx |
Copper Carbide Cones and Rotor Saws
The B&J Carbide Cones and Rotor Saws are ideally suited for nail hole repairs as well as for deep, narrow holes where damage to the tire should be minimised. With lengths of up to 102 mm, widths of up to 25 mm and a grain size of 14 or more, any repair can be carried out quickly and efficiently.
The B&J Rotor Saws have been specially developed for smaller repairs or inspection work. With diameters from 15 mm and a width from 3 mm and more, the tread surface remains as small as necessary.
All Cones and Rotor Saws (Article No.’s)